Put the hood into the front of the lens and rotate it 90° clockwise until it is fastened. At this time, the circular pit should be aligned with the focal length indicator. When properly installed, the large hood on the hood should be in the up and down position. Do not install the hood forcibly. If you cannot register, please check whether the position is correct. Remove the hood, rotate it 90° counterclockwise, and take it out. When the camera is not in use, the hood can be installed upside down. When one of the large hoods is put on top, put the hood on the front of the lens and rotate it 90° clockwise until it clicks. When the camera is covered with the lens cap, you can also attach or remove the lens hood. To remove the hood, rotate it 90° counterclockwise and take it out. In bright daylight or backlight conditions, the lens hood will minimize lens flare and ghosting. The lens hood can block excess light and improve picture quality. Check if the camera is turned off and the lens has been retracted.
How to install the hood:
(1) Place the camera upside down.
(2) Hook the hook into the lens hood adapter.
(3) Push the lens hood.
(4) Align the marks as shown in the figure.
(5) Fix the screw. Check that the screws are fastened, and then install the lens hood.
(6) Do not fasten the screws too tightly.
Hot Tags: black chicken farm light trap, China, suppliers, manufacturers, factory, buy, price, cheap, for sale, made in China, Push Pull Fan For Poultry, Exhaust Fan 6 Inch For Poultry, Ventilation System For Poultry, Exhaust Fan Ceiling For Chicken House, Hanging Cow Fan For Dairy Farm, Butterfly Cone Fan For Chicken Farm
